Edge-lighting Plaza Small Dimmable Bedienungsanleitung PDF herunterladen (Seite 2)

8: Feed the power wires through the mounting plate center

hole and slide the mounting plate onto the nipple.

9: Secure the mounting plate to the crossbar assembly by

tightening the nut and lock washer. Make sure that the

mounting plate holes line up with the anchors.

NUT

LOCK WASHER

6: Use a 9/32 drill bit to make holes on all six marked points.

7: Tap the anchors into the drilled holes with a hammer.

WALL

ANCHOR

9/32 DRILL BIT

10: Level the mounting bracket horizontally and use the #8

screws to secure the mounting plate to the anchors.

#8 SCREW

NIPPLE

MOUNTING

PLATE

1 2 3

Keine Kommentare

Edge-lighting Plaza Small Dimmable Bedienungsanleitung Seite 2